<< back to list of Academic Staff

Prof. Dr. Ir. Syoni Soepriyanto, M. Sc
NIP: 195203181976031001
Head of Metallurgical Engineering Research Group

Google Scholar ID

CONTACT

Tel : +62 2502239, 2508131
Fax : +62 2504209
Emai : syonis@mining.itb.ac.id ; syonis2@gmail.com

EDUCATION

• Ir in Metallurgical Engineering – Institute of Technology Bandung (1977)
• M.Sc in Process Metallurgy – The University of Utah, USA (1986)
• Ph.D in Metallurgy and Material Science – The University of Utah, USA (1991)

TEACHING AREAS

• Transport Phenomena
• Mathematical Modeling
• Physical Metallurgy
• Metal Forming & Shaping
• Theory of Sintering
• Fuel, Furnaces, and Refractory
• Defect Oxides Ceramics
• Metallurgical Failure Analysis
• Pipeline Risk & Integrity

RESEARCH INTERESTS

• Physical Metallurgy & Ceramics
• High Temperature Processes
• Synthesis of New Materials
• Defect & Ionic Transport in Ceramics
• Failure Analysis & Risk Assessment
• Coal Handling & Transportation System
• Momentum, Heat, and Mass Transfer Operation

PROFESSIONAL SOCIETIES

• Association of Indonesian Mining Professional (PERHAPI)
• Indonesian Corrosion Association (Indocor)
• IEEE – Microwave, Indonesia Section
• Material Society of Indonesia (MMI)
• Ceramic Research Group – ITB
• Pipeline Integrity Research (PIR) Group – ITB

PUBLICATIONS AND TECHNICAL REPORTS

• Dilasari, B., Nugraha, A.A., Sari, M.P., Soepriyanto, S. Study of Ketoconazole and Fluconazole as Organic Inhibitors for Mild Steel in Chloride and Carbonate-containing Solution. Journal of Chemical Technology and Metallurgy, 2021, 56(3), pp. 660–666
• Soepriyanto, S., Aristanti, Y., Theresia, T., …Minwal, W.P., Dilasari, B. Comparative effect of REO co-dopant (La, Y, Nd) on ionic conductivity of Gd-doped CeO₂ solid electrolyte for IT-SOFC. Journal of the Australian Ceramic Society, 2019, 55(4), pp. 1161–1165
• Kusharjanto,, Soepriyanto, S., Korda, A.A., Dwiwanto, S.A. Effect of ZnO nanoparticles to mechanical properties of thixoformed Mg-Al-Zn alloy. Materials Research Express, 2018, 5(3), 036517
• Rahmawati, F., Permadani, I., Syarif, D.G., Soepriyanto, S. Electrical properties of various composition of yttrium Doped-Zirconia prepared from local zircon sand. International Journal of Technology, 2017, 8(5), pp. 939–946
• Handayani, I., Paisal, Y., Soepriyanto, S., Chaerun, S.K. Biodesulfurization of organic sulfur in Tondongkura coal from Indonesia by multi-stage bioprocess treatments. Hydrometallurgy, 2017, 168, pp. 84–93
• Syarif, D.G., Soepriyanto, S., Ismunandar,, Korda, A.A. Effect of LSGM addition on electrical characteristics of 8ysz ceramics for solid electrolyte.Journal of the Australian Ceramic Society, 2013, 49(2), pp. 52–59
• Rahmawati, F., Prijamboedi, B., Soepriyanto, S., Ismunandar. SOFC composite electrolyte based on LSGM-8282 and zirconia or doped zirconia from zircon concentrate. International Journal of Minerals, Metallurgy and Materials, 2012, 19(9), pp. 863–871
• Rahmawati, F., Prijamboedi, B., Soepriyanto, S., Ismunandar. Doping calcia and Yttria into Zirconia obtained from by product of tin concentrator to improve its ionic conductivity. ITB Journal of Science, 2011, 43 A(1), pp. 9–18
• S. Soepriyanto and A.A. Korda, “Maintaining and Enhancing Pipeline Integrity”, to be presented at Asia – Oil & Gas Conference, 2007.
• S. Soepriyanto, W. Martoyo., A. Affan., “Creep Resistance of Stainless-steel for Boiler Power-plant Application”, ITB Research Program; LPPM-ITB; Bandung, 2006.
• S. Soepriyanto, and Taufiq, H., “Synthesisi of Nanocrystallite Zirconia from By Product of Tin Processing”, International Conference on Mathematics and Natural Science, ITB-Bandung, 2006.
• S.Soepriyanto, at.al., Assestment and Recommendation of Gas Pipeline Rehabilitation for Porong Gas Distribution, PT. Pertamina, 2006.
• S. Soepriyanto, W. Martoyo., T. Hidayat, R. Widiyanto. : “Processing of Zircon Opacifier to Zirconia for Advanced Materials”, ITB Research Program; LPPM-ITB; Bandung, 2005.
• S. Soepriyanto, Ahmad Taufik, Markus K. Umboh : “Predictive Modeling of Pipeline Wall Thickness During Slurry Transportation System”, Proceedings International MAPREC 2005 ‘Maintenance & Production Reliability Conference’, Jakarta, 10-12 May 2005.
• S. Soepriyanto, AA Korda, T Hidayat : “Development of Zircon Base Industrial Product From Zircon-Sand Concentrate of Bangka Tin Processing”, Proceedings of the 3rd International Workshop on Earth Science and Technology – Fukuoka, Japan, December 2005.
• M Akbar Ramdhani, S. Soepriyanto, Aditianto R., Bambang A. : “Determination of Sintering Mechanism and Grain Growth Kinetics of MgO-DOPED Al2O3”, Jurnal Teknologi Mineral, Vol XII No. 3 Tahun 2005.
• S. Soepriyanto, M. Umboh, A Korda : “Slurry Pipeline Technology : System Transport Parameters”, Indonesian Pipeline Technology-2004, Conference and Exhibition Proceeding, Bandung, January 27-28, 2004.
• Setiawan, Sobandi, S. Soepriyanto : “Production of Ultra Low Sulfur Steel Slab at PT. Krakatau Steel for API5L-X Sour-Gas Pipeline Material”, Indonesian Pipeline Technology 2004 Conference and Exhibition Proceeding. Aula Barat ITB, Bandung, January 27-28, 2004, Bandung.
• S. Soepriyanto: “Modeling and Simulation of Shrinkage Geometry During Sintering : Multipartikel dan Multicomponen System”, Jurnal Teknologi Mineral, Vol XI No. 3, 2004.
• S. Soepriyanto, Z Zulham, EA Basuki, S Purwadaria, W. Martoyo, AA Korda, P Cahyono, A Sobndi, Muchtar, M Hidayat : “Optimization on Liquid Steel Desulfurization in the Ladle-Furnace”, Jurnal Teknologi Mineral, Vol. X No. 2, 2003.
• S. Soepriyanto, D. Ihsanudin, M. Arma, W. Martoyo : “Zircon-Glaze Characteristic using Zircon Concentrate from By Product of Bangka Tin Ore Concentration,”, Jurnal Teknologi Mineral, Vol X No. 1 Tahun 2003.
• Akhyar, A. Taufik J., S. Soepriyanto: “Simulation on Fatigue Crack Propagation of AISI 1045 Axle under Flexural Dynamic Load with Constant Stress Amplitude”, Jurnal Teknik Mesin. Vol. XVII No. 1, Maret 2002.
• T. Darijanto, A.D. Titisari, S. Soepriyanto, and Syafrizal : “Substitution Brexi Flystone on Ceramic Raw Material and its Effect on Mineral Phases Formation”, Jurnal Teknologi Mineral, Vol. IX No.3 Tahun 2002.
• S. Soepriyanto, M. Jinan S., E. Septe, K. Herlambang : “Rate Analysis of Elektroless Nickel Plating on Aluminum-2024 Alloy using Hipofosfit Reductor and its Heat-treatment”, Jurnal Teknologi Mineral, Vol.VII No.4 Tahun 2000.
• A. A. Korda, S. Soepriyanto, H. Hasyim., W. Martoyo. : “Effect of Process Parameter on Increasing Formability of Ti-containing Interstitial Free Steel”, KS-Review, Volume IV No.2 January,Cilegon.
• S. Soepriyanto: “Potential Resources and Problems for Mineral Industry and its Utilization in Indonesia”, Proceedings of HEDS-SST 1999, Batam 23-25 February 2000, Jakarta.
• S. Soepriyanto : “Increasing Added-value and Competitiveness of Indonesia Industrial Minerals as a Fullfilment of Market Demand Specification (Keynotes)”, Industrial Minerals Qoloqium, MTRDC – DJPU, Bandung, 16 March 1999.
• S. Soepriyanto, D.Risanti, R.Pratjihno: “Dielectric Ceramic Bandpass-filters For Microwave Application”, Third Workshop On Electro-Communication and Information, IECI – Department of Electrical Engineering ITB, March 3-4, 1999; Bandung.
• S. Soepriyanto and W.Martoyo, “Structure Interelation on BaO-TiO2 System in Sintering Systhesis of BaxTi4xO10x Materials at Temperature above 1400 OC”, Higher Education Basic Research, Directorate of Higher Education, 1998-1999.
• S. Soepriyanto and R. Kohar, Corrosion simulation on heat-treated 304 stainless-steel weldment, Proceeding of The Asia-Pacific Corrosion Conference, Denpasar-Bali, October 1997.
• S. Soepriyanto dan B. Setiawan, “Characteristic Assessment on Cold-rolled Coil Steel Formability for Enamel dan Otomotive Aplication”, Iron & Steel Symposium; 1996, ITB, Bandung.
• S. Soepriyanto, D.Lumanauw, dan J. Swandajani, “Linier Shrinkage Analysis on Sintering Product”, Jurnal Teknologi Mineral, vol. 2, no.2, 1995.
• S. Soepriyanto, K. Herlambang., H.K. Sudjono, “Fabrication of Mg-Zn-Magnetite Ferrite with Rare Earth Oxides Doped for Microwave Telecommunication Application”, National Research Grant – II / Ministry of Research & Technology, RI ; 1994-1997 ; Jakarta.

RESEARCH AND PROJECT ACTIVITIES

1. Fabrication of Various Metal/Ceramics Components
2. Feasibility Study on Coal-fired Power-plant for Electric Generation
3. Feasibility Study on the Development of by Product Minerals of Tin.
4. Development of Zircon Product from Zircon-Sand Concentrate Processing and the Synthesis of Nano-crystallite Zirconia.
5. Synthesis and ionic-conductance of various REO-doped YSZ for catalyst and Fuel-cells.
6. Modeling and Visualization of Tailing Transport & Deposition at ModADA Toward Mine Closure.
7. Analysis of Metallurgical Failure
8. Pipeline Integrity and Risk Analysis for Oil/Gas Distribution System.
9. Iron Sand Reduction for Pig Iron Production and Titano Slag Treatment.
10. Feasibility Study on Coal Handling & Transportation System.

PROFESSIONAL INTERESTS AND CONSULTING

1. Treatment of Titano Iron-sand Slag, Research Design, 2007-2008.
2. Synthesis of zirconia doped nanoparticle for ionic conductance, Research Design, 2006-2009.
3. Recommendation and Rehabilitation of Porong Gas Distribution Pipeline, Pipeline Integrity Research Group – ITB, 2006-2007.
4. Integrated Coal Transportation System, 2006-2007
5. Research and Training Development for Tin Industry, 2002-2006.
6. Law & Regulation for Mining Industries, 2001-2004.
7. Iron & Steel Making, Training – R & D, 2000-2003.
8. Dwang-rail Analysis & Design, Bridges Coating Standard for Railways 2001-2002
9. Tailing Transport & Deposition – Environmental Program, 1999-2006.
10. Ceramics Device for Microwave Telecommunication, R & D Technical Advisor, 1992-1998.
11. Military Product Development, Technical Assistance, 1994-1996.
12. Coal Briquetting Project, Technical Advisory, 1992-1995.

Version: September 2007.